BGA test seat: How to maintain BGA test seat equipment scientifically?
Source:
Author:
A handy BGA repair equipment, the price range from ten thousand to hundreds of thousands. Improper maintenance can easily lead to machine aging or failure. In order to prolong the service life of BGA rework station equipment, give full play to its due value, maintenance needs science, machines need to love, BGA rework station is difficult to maintain. As long as the following six points are done, the machine of BGA rework station can be used more smoothly. Then, BGA test seat: How to maintain the BGA test seat equipment is scientific?
BGA test seat: How to maintain BGA test seat equipment scientifically?
1. The outer surface of the grating should be kept clean to prevent the signal from being blocked, resulting in induction failure; Check the working condition of the grille regularly to ensure personal safety.
2. The slide bar of the clamp should be kept clean at any time, and lubricating oil should be added regularly.
3. The lens and light source of the lower optical system and the upper optical system should be kept clean, and the surface dust or oil should be removed regularly.
4. Keep the heating dish clean and avoid rosin, alcohol and water dripping on it. In addition, the heating plate is fragile parts, can not be hit by hard objects. If any foreign matter sticks to the heating plate, wipe it clean with a muslin cloth and a small amount of anti-rust oil or alcohol.
5. X axis and Y axis transmission module should be kept away from debris, and lubricating oil should be added regularly; The two sets of screw drives at the head also need lubrication.
6. Pay attention to the antirust of the suction nozzle and straw, and apply anti-rust oil regularly.
BGA Test Seat: What are the four points to pay attention to when choosing BGA maintenance equipment?
With the development of technology, this kind of bga rework station gradually appears, so we need to spend more energy when choosing bga rework station.
1. Machine control systems are generally controlled by instruments, touch screens and computers. The instruments are too complicated to operate, computers are more expensive, and touch screens are more practical.
2. Considering the size of the BGA chip, choose the machine with the appropriate size of the BGA chip. The bigger the better.
3. Select according to temperature accuracy. As we all know, temperature accuracy is at the heart of bga rework stations, and the industry standard is plus or minus 3 degrees. The smaller the temperature difference, the better. It can be simulated by furnace temperature tester.
4. Infrared heating equipment can be selected. This proposal is mainly due to the variety and classification of bga reworking stations, which is convenient, accurate and high efficiency in the treatment of various BGA. Infrared heating device is recommended.

Lanyi Electronics - Semiconductor Test Probe Manufacturing Plant
Customer first, quality first, unity and cooperation, mutual benefit and win-win






Copyright © 2022 Dongguan Lanyi Electronic Technology Co., Ltd. All Rights Reserved. 粤ICP备17061266号 Powered by www.300.cn SEO